福特Ford UCDS Pro+ Ford V1.27全功能版本 含35点
- 品牌:FORD/福特
支持的功能:
1读取故障码
2 清楚故障码
3 读数据流
4 数据记录
5 模块复位
6 模块安装
7 重新编程ECUTCMBCM等等
8 清除气囊(RCM)碰撞数据
9 读取,备份,编辑,刷写AsBuilt文件
10 读取,备份,编辑,刷写DirectConfig底层配置文件
11 支持动力提升刷写,比如蒙迪欧2.0T 200HP刷240HP,12福克斯85HP刷105HP 、150HP刷163HP
12 支持VBF文件直接刷写
13 支持BIN文件直接刷写
14 支持在线更新全车模块(Update Wizard)
15 支持福克斯MK2,12福克斯MK3,致胜,S-Max等车型仪表里程清零,刷写
福特USDS支持下列车型:
福克斯MK2(2004-2014)C307
新福克斯MK3((咨询特价)17)C346
翼虎15翼虎17翼虎
蒙迪欧致胜S-MaxGalaxy
新蒙迪欧13款(Mondeo5)
探险者(Explorer)
全顺
嘉年华B-Max
翼博等等各种新车型
新翼虎(为例):
支持功能:
扫描及清除故障码,As-built文件修改 仪表升级刷新及清零 ,PCM刷新及动力提升(200P 刷240P等) ,TCM的升级刷新,SONY CD机头的升级,,ABS模组编程,RCM编程及复位 ,直接配置IPC BCMII APIM,CAN-BUS监控日志。
支持模块:
BCM II,PCM,TCM,IPC,ABS,RCM
常用功能:
DDS 胎压监控,折叠倒车镜,定速巡含自动大灯,自动雨刷,轮胎改装,导航激活,ABS模组安装,RCM碰撞数据清除,仪表里程复位调校
The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm. UCDS currently works with the following platforms: Focus II 2004-2011; Focus III 2011, 2015 ; Kuga I, Kuga II; C-MAX; S-MAX; MONDEO IV; Mondeo 2015 ; Galaxy ; Tansit; Fiesta 2008, 20015 etc..
UCDS-Ford
UCDS-Ford New Features:
The dashboard can be displayed from English to Chinese; the new Mondeo power can be upgraded from low to high; the navigation OPS of Escape can be flashed; the SCT program can be input; the SCT device (token limited) can be replaced.
UCDS-Ford Functions:
UCDS allows the user to:
– Diagnose the majority of car parts and components that are connected to a central electrical module (GEM, BCMii) through the data bus (CAN);
– Receive data embedded in the car components and modules, including their part number, version, calibration, serial number;
– Make the necessary changes to the central configuration of the car, and change the configuration of the modules and components if necessary;
– Update the calibration (firmware) of the modules and components of the vehicle, including the engine (the so-called chip tuning);
– Perform regular language adaptation of the audio modules manufactured by SONY (Russian language only);
– Other…
The UCDS consists of drivers of the serial bus USB-serial (recommended drivers FTDI), hardware adapter and the actual UCDS-programm.
The software interface of the UCDS interface has main window’s mode. You need to select the type of the vehicle or select the service mode for adapter`s firmware update or other service functions.
UCDS currently works with the following platforms: Focus II 2004-2011; Focus III 2011, 2015 ; Kuga I, Kuga II; C-MAX; S-MAX; MONDEO IV; Mondeo 2015 ; Galaxy ; Tansit; Fiesta 2008, 20015 etc..
NEW v1.26.005 software is Available:
Package List:
1pc x UCDS-Ford